Jeremy Engle, VP Operation on why they moved forward with the project so quickly, “we are very happy with the DCOS solution that was installed last year. We are seeing immediate results and our production team believes it was the best install they have experienced.”
“Engle has been a fantastic customer for our closed loop density and register control equipment. We greatly appreciate the confidence they have in DCOS and look forward to continuing this partnership with the goal of making their presses run more efficiently, with low waste, and enhanced print quality” says Ron Ehrhardt, Sales Director – Americas, DCOS Sweden AB.
DCOS has also been contracted to replace the drives on an existing chill roll assembly on Engle’s Tensor T460 press with IR dryers.
The equipment will be shipped in May 2019 and installation will be completed by the end of June 2019.
About DCOS Inspection System
DCOS Inspection Systems is a range of in-house developed camera based systems for the printing industry. The systems automate a majority of the traditionally manual quality adjustments made in the printing process. This in turn increases productivity and cost effectiveness as waste, start-up time, use of consumables and manning can be greatly reduced. At the same time a high and consistent quality is guaranteed.
DCOS Inspection System measures solid ink micro marks. Offline densitometric measurement of ink solid is proven in the industry for decades, it simple and stable. DCOS has reengineered the concept and developed an online high-speed solution adaptable to any press. This technology is optimized for best performance, repeatability and effectiveness. This is proven at installation across the globe.
(https://engleonline.com/printing/ – https://dcos.com)
Engle Printing Company orders second DCOS press automation upgrade
Engle Printing Company orders second DCOS press automation upgrade
Article ID:
22424
Kinna, May 8, 2019 – Engle Printing Company, Inc (EPC,) a family owned printing company located in Lancaster, Pennsylvania, has ordered a second CRC4 closed loop density / register control system from DCOS Automation. The CRC4 system will be installed on a second Tensor T400BE press with a configuration of four towers and one folder replacing the existing WPC register system. For ink density control, DCOS will integrate the CRC4 camera system with the existing Perretta remote inkers-The second press order came only a month after completion of the initial installation.
![](http://archive.wan-ifra.org/sites/default/files/imagecache/default_col_4/field_article_image/promo2.jpg)
Attachments
Related Articles
-
2020-10-15 11:21
-
2020-10-08 10:36
-
2020-09-29 17:42
-
2020-09-29 17:24
-
2020-09-29 10:57